|
|
Post by briansblackz on Sept 18, 2005 11:30:40 GMT -5
Ok I need to know what else i need to get. I just bought the NOS-08008 efi dircet port nitrous system. I have msd 8.5mm wires, 6al digtal box and gm blaster coil. I will be doing a 175 shot. What fuel stuff do i need to do to it. Also what gauges do I need to get to make sure that everthing is running right.
|
|
|
|
Post by fast93z on Sept 19, 2005 12:03:17 GMT -5
Not familiar with that kit...What comes with it?
|
|
|
|
Post by jaberwaki on Sept 20, 2005 4:13:23 GMT -5
racetronix fuelpak should have you covered for fuel
|
|
|
|
Post by briansblackz on Sept 20, 2005 7:24:19 GMT -5
It is dircet port system that you don't have to drill the tappes in the intake. It gives you a nozzle that goes on the end of the fuel injectors. So you get perfect fuel/nitrous mix. It makes the fuel runners sit up a liitle more but that is the only downside, that and the price.
|
|
|
|
Post by fast93z on Sept 20, 2005 8:13:37 GMT -5
Did it come with a fuel pressure safety switch? Will you be tapping fuel from the stock fuel rails?
|
|
|
|
Post by briansblackz on Sept 21, 2005 14:09:10 GMT -5
|
|
|
|
Post by jaberwaki on Sept 22, 2005 0:26:15 GMT -5
ebay took that item down
|
|
|
|
Post by fast93z on Sept 22, 2005 9:00:16 GMT -5
I understand the style of nozzles. You have the piggyback style under the injectors. Basically the NXL style that NX makes. Just make sure you have a good fuel pump, a fuel pressure cut off switch, a rpm window switch, and dyno tune it with air-fuel on the dyno.
|
|
