what turbo setup does everyone have??

[aggiez28]

i have a 94 z28 with a 400 ci lt1 afr 215RR heads, vitcor jr intake, pte 88mm turbo solid roller. all this is followed by a custom t56 and a 9 inch

what do yall have
brook

['68SuperchargedLT1Camaro]

I've got some Lincoln Logs and some Legos! ;D

Jesus Christ Brook, post some pics! That motor sounds nice.

Raymond

[94m6hardtopz]

i really like the turbo technology kits. overall they are a good design, are built well and ship out in a timely manner. i was really pleased with the turbo tech kit i had on one of my mustangs years ago. after about 5 years i had a weld crack on the manifold, but that was easy enough to fix.

[N20Dave]

Is that all? Man and I thought you were getting serious.

aggiez28 said:

i have a 94 z28 with a 400 ci lt1 afr 215RR heads, vitcor jr intake, pte 88mm turbo solid roller. all this is followed by a custom t56 and a 9 inch

what do yall have
brook

[JoshuaJames]

aggiez28, if you have any pics of the exhaust manifolds before install please send to [e-mail]
thanx ;D

[OUTCAST]

I have the ProTurbo Kit on my car it is a good system. Did have some heating issues but that is fixed now.

[Chrisbequick]

Homebuilt kit with a frame-mounted HKS T51R SPL and a Blitz intercooler for a Skyline.

-Chris

[blownbird]

right now i have an 89 GTA and a 91 iroc im runnin 2 Syclone 20g turbo's upgrade versions putting out 660 cfm and good for 430 hp each these are feeding a beefed up 5.7 with all internals and externals matched to the turbos. Motor was living in the 89 but the t-topped bird didnt like all the flexing going on and caging and bracing wasnt an option for this daily driven car, i am finishing up the camaros appearance as well as caging, and sub-braces and then thatll be its new home. Hp can been seen at bottom below sig and with a little more boost and tuning and i believe i could put it into the 1g hp range.