|
|
Post by JoeCool on Aug 13, 2005 22:37:18 GMT -5
We all have this hump in the LS1 and Lt1 cars. Makes the passenger floorboard quite uncomfortable. Has anyone removed it or heard of it done?
|
|
|
|
Post by '68SuperchargedLT1Camaro on Aug 13, 2005 22:42:36 GMT -5
???Which hump?
Raymond
|
|
RedLT4Mike
Stock
in the relentless pursuit of knowledge and speed
Posts: 16
|
Post by RedLT4Mike on Aug 14, 2005 3:10:32 GMT -5
That would be the hump that is for catalytic converter clearance.
I have thought a few times about hacking it up, but I don't think it would be worth the
time... If you feel so inclined, feel free to be the pioneer to provide the template!
|
|
|
|
Post by 93yellowfbody on Aug 14, 2005 11:07:09 GMT -5
all you have to do is cut it out and tack in a new floorboard,but make sure you don't mess with the trans support bracket,because that's where it get's difficult.
|
|
|
|
Post by jaberwaki on Aug 25, 2005 14:36:18 GMT -5
as long as you do not have cats then cut it out and weld up some new sleet metel... done and done...
|
|
|
|
Post by AAron on Aug 25, 2005 16:54:02 GMT -5
my opinion is that it is a unibody car leav it alone. you will most likely do more harm than good
|
|
