All kinds of LT1-f-body stuff

[Fire67]

I need to clear out some stuff I've had laying around for a while.

Vigilante 3600 torque converter
Paid $700 Some time left of warranty, fairly new. Its been sitting in my garage for about 6months.
Make me an offer

Pro-Built Inc. "Limited Street" 4L60-E
Paid $2300.00 All the best parts installed, burnt apply band or clutch pack, cheap re-build/re-fresh... I'll find the link and post it up later. Make me an offer

SLP loudmouth cat-back, paid 450.00 had installed about 6months. Had to cut the over axle pipe for removal, I'll make sure its fixed before shipping out.
$200obo

Stock exhaust manifolds, dual cat y-pipe. Good shape, cats are not clogged or harmed in any way. Broken stud on drivers side manifold-to-Y pipe flange. Make me an offer.

Stock emissions equip, ALL except fuel tank evap stuff... If you need it ask with price your willing to pay.

More to come, if you need pics, ask and I'll post em.

>>EDIT<<
Powerdyne BD-11a LT1 F-body kit... Blower needs rebuild due to broken internal belt, and new drive pulley because of a sheared keyway. Also missing a piece of flew tube for the intake. Everything else is there, including a barely used FMU. I had a sale pending but my last successful contact with the person was him saying he would send the money, which he hasnt done and its been about a month.
I was asking $1000, and agreed on $700 plus shipping with the other guy. So if you can match that offer, or even come close, its yours! I have lots of pics of this one.

42lb/hr SVO green tops 6K mi max... Paid $400 Ill take $250 shipped.

[turtle]

I'm interested in the cat back Justin. got any pics?

[Fire67]

Yeah, I should have some... Let me dig around a bit and I'll see what I can post up.
Sorry it took so long to reply, I forgot I posted this ad before the site went down.

[Fire67]

Here ya go!




That last pic shows were I had cut the intermediate pipe with a torch to remove the cat-back from the car.
I'll have it fixed as soon as I know its sold.

[Fire67]

My stock motor is for sale and will be ready to ship in 2-3 weeks... I know compression is gone in cyl. #1. I think worn rings or a broken ring land is the culprit. No mechanical damage to the spark plug, light metal shavings in the oil(on magnet), stock valvetrain is fine. I have not yet removed the heads to inspect the piston/cylinder.
Im selling the longblock, minus intake and valve-covers as they are being used on the new motor.
Heads have been gasket matched and blended on intake and exhaust ports.
I will consider all reasonable offers.

[turtle]

fire67 said:

Yeah, I should have some... Let me dig around a bit and I'll see what I can post up.
Sorry it took so long to reply, I forgot I posted this ad before the site went down.

Sorry man I decided to to go and do a cam amd header install a few weeks ago(found an LT4 cam for $120). So far I have the cam, springs, and the rockers(and everything else to install them). Now I'm just waiting on getting some shorty headers(I know shorty's arn't that great but I'm on a budget and I don't want any trouble with emmisions) and a PCMForless tune. Once I get this finished I'll still be interested in it(if it's not sold by then). Sorry man

[Fire67]

It's cool, I havent exactly been pushing these parts. I only posted for sale ads here and one other site. Both of which have recieved little to no reply's. Long story - short, I think it'll still be around. So just let me know when your ready.