Post by '68SuperchargedLT1Camaro on Feb 27, 2006 13:29:42 GMT -5
If you have any questions, please instant message me through AIM at LT168CAMARO.
FREE SHIPPING ON ALL ITEMS IN THE CONTINENTAL UNITED STATES.
SOLD!![/color] BRAND NEW CSR LT1 electric water pump. I'll include a factory LT1 housing that has allready had the bearings and impeller pressed out. The freeze plug has been installed, and all the machine work has been done at the opening to accept this pump. All hoses, hose clamps, hose block offs, and the coolant temp sensor will be removed, and are not included.
PIC #1
PIC #2
PIC #3
PIC #4
PIC #5
SOLD!![/color] BRAND NEW ATI custom harmonic balancer with dual keyed, large outer diameter hub. I also have the ATI "torx" bit to bolt the outer shell to the hub. I'll also include the correct timing cover seal for the hub. Your LT1 timing cover will need to be modified slightly by a machine shop for this seal to fit.
68lt1camaro.proboards44.com/index.cgi?action=display&board=LT1&thread=1140800164
$250 BRAND NEW Comp Cams Custom blower cam for an LT1 with LE2 heads. This cam was designed by Bret Bauer (SStrokerAce). When I had my heads ported by Lloyd Elliott for my S-trim supercharged LT1, this is the custom cam that Lloyd and Bret designed for me. I told Bret that it had to run 10's, and this is the cam he had ground. With 1.6 roller rockers the lift is .603 intake/.576 exhaust. Duration at .050 is 230 intake/242 exhaust.
PIC #1
PIC #2
PIC #3
$200 each obo. I have two LT1 intake manifolds complete with fuel rails, injectors and throttle body.
I also have two oil pans, a couple old opti's, two sets of stock rods and pistons, two timing covers. Make me an offer for these.
I can take pics for serious inquiries. Thanks.
Raymond
FREE SHIPPING ON ALL ITEMS IN THE CONTINENTAL UNITED STATES.
SOLD!![/color] BRAND NEW CSR LT1 electric water pump. I'll include a factory LT1 housing that has allready had the bearings and impeller pressed out. The freeze plug has been installed, and all the machine work has been done at the opening to accept this pump. All hoses, hose clamps, hose block offs, and the coolant temp sensor will be removed, and are not included.
PIC #1
PIC #2
PIC #3
PIC #4
PIC #5
SOLD!![/color] BRAND NEW ATI custom harmonic balancer with dual keyed, large outer diameter hub. I also have the ATI "torx" bit to bolt the outer shell to the hub. I'll also include the correct timing cover seal for the hub. Your LT1 timing cover will need to be modified slightly by a machine shop for this seal to fit.
68lt1camaro.proboards44.com/index.cgi?action=display&board=LT1&thread=1140800164
$250 BRAND NEW Comp Cams Custom blower cam for an LT1 with LE2 heads. This cam was designed by Bret Bauer (SStrokerAce). When I had my heads ported by Lloyd Elliott for my S-trim supercharged LT1, this is the custom cam that Lloyd and Bret designed for me. I told Bret that it had to run 10's, and this is the cam he had ground. With 1.6 roller rockers the lift is .603 intake/.576 exhaust. Duration at .050 is 230 intake/242 exhaust.
PIC #1
PIC #2
PIC #3
$200 each obo. I have two LT1 intake manifolds complete with fuel rails, injectors and throttle body.
I also have two oil pans, a couple old opti's, two sets of stock rods and pistons, two timing covers. Make me an offer for these.
I can take pics for serious inquiries. Thanks.
Raymond
