|
|
Post by roughneck427 on Oct 21, 2005 10:24:05 GMT -5
these are pics of my heads on my buddies website he has done several sets of heads for me he charged me $600 to do the heads and my intake check out his web site www.airflowperformance.net/LT1.html |
|
|
|
Post by roughneck427 on Oct 21, 2005 13:40:21 GMT -5
i talked to my buddie the owner he said if anyone from the forums e-mails him or calls him just mention you saw it on here and he will give you the same price that i got
|
|
|
|
Post by 94m6hardtopz on Oct 21, 2005 20:06:23 GMT -5
any customer cars with on track or dyno performance?
|
|
|
|
Post by roughneck427 on Oct 25, 2005 11:23:00 GMT -5
i will be posting mine here shortly all i have is a stock bottom end with a hotcam and bolt ons midtubes and so forth with the heads you saw listed those were mine ill be putting the motor in this weekend
|
|
|
|
Post by drewz28 on Oct 26, 2005 16:24:50 GMT -5
Can he set the heads up for forced induction?
|
|
|
|
Post by roughneck427 on Oct 27, 2005 8:50:40 GMT -5
im sure he can do whatever you want just call or e-mail him now i dont want to get in trouble for posting this thread over at another forum that i got to they locked my thread and said i coudnt post his link because it was advertisement and had to pay advertisment fees so hope this doesnt offend anybody here
|
|
|
|
Post by Fire67 on Oct 28, 2005 15:17:57 GMT -5
I dont think you'll have problems with posting links here, as long as your purpose is not to steal or redirect traffic to another forum, or to just advertise...
If your here only to advertise there will be a problem, but if your truly here to learn and contribute knowledge I dont see anyone causing trouble.
In most cases we dont mind links to manufacturers or service providers web-sites at all, especially if they offer products or services directly related to LS1's or LT1's. Links like that can be extremely helpful to someone who's trying to do the required research for a project.
|
|
|
|
Post by roughneck427 on Oct 31, 2005 9:50:54 GMT -5
well thanks im just trying to pass on savings to other people with the same intrest i know im not made of money and im just finishing my budjet build on my 95 m6 car this weekend i got my motor together and found i need to get shorter push rods so i will post dyno results after i get it going
|
|
|
|
Post by slick1851 on Nov 28, 2005 11:08:06 GMT -5
I think this could be very help ful to this site, and have a good hook up when it comes to prices etc......
|
|
