|
|
Post by '68SuperchargedLT1Camaro on Feb 10, 2006 17:13:15 GMT -5
Which heads are you running on your LT1? If you can't find your heads above in the poll, please tell us what your running.
|
|
|
|
Post by cammed95z28 on Feb 11, 2006 15:35:29 GMT -5
Locally ported heads... Port Pros. 2.02intake 1.55exhaust. Outflow LT1 afr's ;D
|
|
|
|
Post by ssnorm96 on Feb 11, 2006 15:49:44 GMT -5
Aluminum LT1's from a 96 SS Camaro....ported em myself...don't have any flow numbers, but the ran pretty good on the 350...hope they feed the needy 383!!!  |
|
|
|
Post by cowboyz28 on Feb 11, 2006 16:31:17 GMT -5
factory heads with all the bolt on's hopefully will have a set of LE3 H/C package over the summer:)
|
|
|
|
Post by black94lt1 on Feb 12, 2006 10:54:31 GMT -5
locally ported stock lt1 heads
|
|
|
|
Post by turtle on Feb 13, 2006 22:32:07 GMT -5
Bone stock heads here  -+-Win32##Microsoft Internet Explorer 6.0##1152 × 864##1-+- |
|
|
|
Post by lt1sierra on Feb 14, 2006 15:59:37 GMT -5
Bone stock heads here -+-Win32##Microsoft Internet Explorer 6.0##1152 × 864##1-+- I feel your pain, I'm in the same boat... -+-Win32##Microsoft Internet Explorer 6.0##1024 × 768##1-+- |
|
|
|
Post by cowboyz28 on Feb 15, 2006 0:16:19 GMT -5
Bone stock heads here -+-Win32##Microsoft Internet Explorer 6.0##1152 × 864##1-+- I feel your pain, I'm in the same boat... -+-Win32##Microsoft Internet Explorer 6.0##1024 × 768##1-+- its really bad for tyler now cuz hes not only got a set of bone stock heads but a wrecked car -+-Win32##Microsoft Internet Explorer 6.0##1280 × 768##1-+- |
|
|
|
Post by BRETTINATOR on Feb 15, 2006 22:50:56 GMT -5
On the 396 stroker being built I'm using my AFR-210s, hopefully Aug if I have enough saved up I'm going with AFR-215 Raised Runners, SuperVic EFI custom welded for raised runners, 100deg elbow and AccuFab 90mm TB.
|
|
|
|
Post by 398lt4guy on Feb 20, 2006 18:21:04 GMT -5
I am gonna be running on my 398 LT4 is Custom LE Trick Flow heads with 2.08, 1.625 valves with LT4 intake port matched to the heads. Arizona Speed & Marine 58mm throttle body. With lots of other goodies  |
|
|
|
Post by northernlt1 on Apr 10, 2006 23:48:14 GMT -5
Using Corvette ported polished 2.00 - 1.56 valves
|
|
|
|
Post by Fire67 on Apr 11, 2006 9:29:51 GMT -5
Port Pros ported LT1 castings. 2.02 - 1.56 valves Outflow AFR 195's hand down, really comparable to the AFR 210's. Actually they outflow them at almost every point across the board on the intake, while the AFR's have it on the exhaust side slightly. ;D  |
|
