|
|
Post by JoshuaJames on Apr 25, 2005 19:12:34 GMT -5
What gear ratios are you m6 drivers running, I recently purchased a 95 t/a and am about to go through the trans. I figure while the car is down I will change the gears as well.
|
|
|
|
Post by 94m6hardtopz on Apr 26, 2005 14:05:12 GMT -5
im probably going to run 4.30s in mine. it depends on the powerband.
|
|
kredz28
Stock
Blown and Intercooled!
Posts: 28
|
Post by kredz28 on Apr 27, 2005 15:00:50 GMT -5
i plan to get a moser 12 here in a few months...im going to go with either 3.42's (from my 3.23's) or 3.73's
|
|
|
|
Post by 94m6hardtopz on Apr 27, 2005 18:51:22 GMT -5
id go w/ the 3.73
|
|
|
|
Post by LS1MightyMouse on Apr 28, 2005 10:39:11 GMT -5
For Autos i wouldnt go higher than 3.73's if its your DD as for 6spd you can get 4.11's and not have a problem thanks to 6th gear  i plan on gettin 3.73's when i get money/time |
|
|
|
Post by bobbylee on Apr 28, 2005 23:27:07 GMT -5
I've got 3.73's. Before you are convinced Moser is the way to go, check out what Strange has to offer. All of my drag racing buds run Strange. It is a quality piece. Another good one made by Currie. Currie is my personal favorite and a real professional shop.
|
|
|
|
Post by '68SuperchargedLT1Camaro on Apr 28, 2005 23:30:31 GMT -5
Before you are convinced Moser is the way to go, check out what Strange has to offer. All of my drag racing buds run Strange. It is a quality piece. Another good one made by Currie. Currie is my personal favorite and a real professional shop. I have to agree with you. Strange and Currie are great rearends. Strange is deffinately a step above Moser. It's good to have you here BobbyLee! Stick around buddy. Raymond |
|
|
|
Post by AAron on Apr 29, 2005 11:04:59 GMT -5
i got 3.23's in the caprice. i need 4.10s or 3.73s, she dosent get off the line that well.
|
|
|
|
Post by JoeCool on Apr 29, 2005 21:53:24 GMT -5
Unless you have a serious race engine I would go no higher than 4.10. Most guys I know with the 6 speed use 4.10. If you want decent gas milage go with the 3.73
|
|
|
|
Post by AAron on Apr 30, 2005 0:58:44 GMT -5
had 4.10s in a 9" in my '01 z28
but my caprice has tall tires 225 75r15s
i dont shift into 6th gear till im at 70-75MPH
oh and it has 3.23s in it now
|
|
|
|
Post by Demon440 on Apr 30, 2005 12:03:57 GMT -5
I just broke my GM 3.73s in my 10 bolt with street tires. I'll have to get a better gear this time. I have a M6 LT1 and I plan on staying with the 3.73s. I am afraid of running out of RPMs in the 1/4 with 4.10s.
|
|
|
|
Post by LS1MightyMouse on Apr 30, 2005 17:29:46 GMT -5
i got 3.23's in the caprice. i need 4.10s or 3.73s, she dosent get off the line that well. My bro has a 96 Caprice with a 3.73 locker in the back. I wouldnt go anything higher than 3.73's but thats just me. And my friend Casey has a 94 Roadmaster wagon with 3.73's haha sweet car. I would go with 3.73's over 4.10 if your goin to be drivin it on the street all the time |
|
|
|
Post by AAron on Apr 30, 2005 20:07:29 GMT -5
My bro has a 96 Caprice with a 3.73 locker in the back. I wouldnt go anything higher than 3.73's but thats just me. And my friend Casey has a 94 Roadmaster wagon with 3.73's haha sweet car. I would go with 3.73's over 4.10 if your goin to be drivin it on the street all the time yeah but with the lower power of the L99 the 4.10 will get me outta the hole better |
|
|
|
Post by AAron on Apr 30, 2005 20:09:32 GMT -5
I just broke my GM 3.73s in my 10 bolt with street tires. I'll have to get a better gear this time. I have a M6 LT1 and I plan on staying with the 3.73s. I am afraid of running out of RPMs in the 1/4 with 4.10s. you might wanna step up to a bigger rearend. i had a 9" in my '01. dumped it at 4K all the time and never even once got a complaint or a whine outta it. the 12 bolts are nice as well. |
|
|
|
Post by 97SprChrgd383 on May 1, 2005 21:52:17 GMT -5
I've got a 9" rear end w/ moser axles and a strange hd posi. I'm running 3.55's. I think that will do. I think currie and strange also are very good rearends.
|
|
|
|
Post by Scooter on May 2, 2005 21:30:31 GMT -5
I've had 3.42, 3.73 & 4.11's in my m6 bird, For my kind of driving the 4.11's are my favorite.
|
|
|
|
Post by JoshuaJames on May 2, 2005 21:33:30 GMT -5
How do you drive? I prefer burn outs and donuts.
|
|
|
|
Post by Scooter on May 2, 2005 22:40:47 GMT -5
Burnouts & doughnuts are the 4.10/4.11's specialty.
I don't race anymore I just like a snappy but driveable combination. I have a mild LT1 by most standards ( stock heads, bolt ons ZZ9 cam etc.) With the 4.11's 1'st- 3rd gear its traction challenged.
|
|
|
|
Post by besz28 on May 8, 2005 14:18:37 GMT -5
i have 373 in my 6 speed and love them, when i step up to a 12 bolt i might then go with some 411's
|
|
i plan on gettin 3.73's when i get money/time
