|
|
Post by '68SuperchargedLT1Camaro on May 27, 2005 23:42:14 GMT -5
Do you have aftermarket roller rockers? I've heard that these can cause false knock.
I've allways ran Accel Gen 7 DFI, so I am completely unfamiliar with the sock PCM. I can only relay what I've heard.
Raymond
|
|
|
|
Post by '68SuperchargedLT1Camaro on May 27, 2005 23:54:48 GMT -5
Wish I could help you more.  Hopefully, someone else will chime in. Good luck buddy. Raymond |
|
FD2BLK
Junior Dragster
Posts: 5
|
Post by FD2BLK on Jun 3, 2005 7:42:59 GMT -5
As stated in the previous post,
Are the KS's new?
I had the same problem when I was sold the wrong sensors.
THe OBDI and OBDII use diferent sensors the OBDIs are as stated around 4K while the OBDII sensors are closer to 100K
|
|
|
|
Post by slow260z on Jun 4, 2005 23:26:14 GMT -5
OK I thought I could delete post but on this sitre you can't
I found the problem MALF 43 in my case was a broken wire to the knock sensor. Would check ok but sometimes casue voltage to knock module to be out of range.
Problem is corrected
Thanks
PS Sorry about half azzed deleting thread
|
|
Hopefully, someone else will chime in. Good luck buddy.
