Iroc313
Super Stock
Gangsta
Posts: 55
|
Post by Iroc313 on Oct 28, 2005 23:22:45 GMT -5
well we finally got the new chip so we can finally get the new motor in the chip's set up for SLP runners and I forget the rest
The new motor has eldlebrock aluminum heads, a compcam, and LS1 injectors ;D
|
|
|
|
Post by AAron on Oct 29, 2005 10:40:07 GMT -5
cool. keep us updated
|
|
|
|
Post by zz17iroc on Oct 29, 2005 19:56:59 GMT -5
Get that thing running.
|
|
Iroc313
Super Stock
Gangsta
Posts: 55
|
Post by Iroc313 on Oct 29, 2005 20:06:01 GMT -5
we will have it in in the next two weeks I'll try and make a vid of it running and find someway to host it. I can't wait ;D
|
|
Iroc313
Super Stock
Gangsta
Posts: 55
|
Post by Iroc313 on Feb 27, 2006 23:06:31 GMT -5
[glow=red,2,300]ITS IN AND RUNNING[/glow] its been a long hard and annoying process but the old 305 is out and the 355 is in the only problem is the chip is messed up so were going to have to get another one burned. We put the old one in and she purred like a kitten. I have a vid but its a mini DV camcorder so I have to figure out a way to get it on the computer but one thing I have plenty of is pictures   bye bye 305   heres the new motor its got edlebrock aluminum preformer RPM heads comp cams roller rocker arms and TPIS ZZ4 cam    |
|
|
|
Post by zz17iroc on Feb 27, 2006 23:39:11 GMT -5
Who burned your chip for you?
I started burning my own chips about 6 years ago and never looked back. Let me know if you need some help.
By the way it's looking pretty good!
|
|
Iroc313
Super Stock
Gangsta
Posts: 55
|
Post by Iroc313 on Mar 4, 2006 21:15:01 GMT -5
drove it home the other night it was pretty smooth except for Idle we still gotta do some fine tuning but its pretty much set man it has alot more torque than before
still using the old chip were going to get the baseline down and then we'll put the new one in and try it again
|
|
Iroc313
Super Stock
Gangsta
Posts: 55
|
Post by Iroc313 on Mar 20, 2006 19:31:31 GMT -5
we got another chip burned at first it did not run at all then we found out we put it in a pin over on accident we put it in the right place and it runs ALOT better now we just have to fix a tranny leak and it'll be just about done
|
|
Iroc313
Super Stock
Gangsta
Posts: 55
|
Post by Iroc313 on Jun 18, 2006 16:35:02 GMT -5
*UPDATE*
We just got a superram and new exhaust those will be in by the end of next month hey I've heard that superrams are a biaatchhh to install do any of you guys have any tips/hints on ways to install it
|
|
|
|
Post by AAron on Jun 18, 2006 20:36:07 GMT -5
no clue
|
|
|
|
Post by Fire67 on Jun 19, 2006 8:51:15 GMT -5
Here's a tip on that super ram intake...
You'll notice that the plenum is attached to the runners with allen screws that have to be screwed in from underneath. Thats the biaatchhh part.
What we did was drill the threads out of the plenum and then tap the runner flange to accept a slightly larger screw that gets installed from the top. Just remove the plenum cover and you have all the access to these screws you could ever want. But be careful not to drop any screws down into the runners.
This mod allowed us to easily get all the screws in and get them all evenly torqued. If you dont get them evenly torqued you'll have vac. leaks.
Good luck, and enjoy that superram!
|
|
Iroc313
Super Stock
Gangsta
Posts: 55
|
Post by Iroc313 on Jun 19, 2006 21:00:48 GMT -5
thanks for the help man I appreciate it
|
|
|
|
Post by jdawgs94z on Aug 17, 2006 6:56:12 GMT -5
updates please ;D,i cant wait to see the vids on it  |
|
