|
|
Post by metalbeast on Aug 26, 2005 9:24:17 GMT -5
Looking for a vendor that sells 396 Stroker kits for LT1s. I have searched around but am having little luck. Any help would be appreciated!
|
|
|
|
Post by jdawgs94z on Aug 26, 2005 9:56:04 GMT -5
there are several on ebay,but they use eagle cranks  ,i think one carries lunati cranks in the kit,hope this helps  |
|
|
|
Post by metalbeast on Aug 26, 2005 10:08:45 GMT -5
I have heard mixed things about the Eagle cranks. What is it that seems to be the big hang up about using them?
|
|
|
|
Post by jdawgs94z on Aug 26, 2005 10:19:56 GMT -5
i personally don't know,i heard that they are so mass produced that they tend to break,those kits on ebay are just the crank,h bars,piston heads,and bearings for around $1400,i think it would be cheaper to buy the stuff seperately on thunder racing.
|
|
|
|
Post by metalbeast on Aug 26, 2005 10:44:57 GMT -5
i personally don't know,i heard that they are so mass produced that they tend to break,those kits on ebay are just the crank,h bars,piston heads,and bearings for around $1400,i think it would be cheaper to buy the stuff seperately on thunder racing. I always thought it would be cheaper to buy it as a kit. I'll have to check into that though. |
|
|
|
Post by Fire67 on Aug 26, 2005 10:47:45 GMT -5
Eagle 4340 cranks have a decent rep, I think the people that break them dont understand the importance of having a good machine shop balance the rotating assembly, and then spraying the crap out of em...
My buddy's building a turbo LT1 with Eagle crank & rods in a two bolt block...
Im probably gonna be using a Lunati or Callies crank because of the strokes and configurations available.
|
|
|
|
Post by 94m6hardtopz on Aug 28, 2005 23:37:19 GMT -5
|
|
|
|
Post by metalbeast on Aug 29, 2005 7:19:24 GMT -5
Thanks for all the useful advice guys! I'll have to check out Adperformance. Thanks 94m6hardtop  |
|
|
|
Post by metalbeast on Aug 29, 2005 13:51:45 GMT -5
I looked on the Adperformance website but I could not find any 396 stroker kits.
|
|
|
|
Post by metalbeast on Aug 29, 2005 21:49:30 GMT -5
Any other suggestions on vendors that sell the kits?
|
|
|
|
Post by Fire67 on Aug 30, 2005 8:15:21 GMT -5
SDPC has one or two stroker kits, but I think their 383... Im not sure who sells actual kits for 396 strokers though..
|
|
|
|
Post by lawrence on Sept 2, 2005 8:15:31 GMT -5
|
|
|
|
Post by metalbeast on Sept 2, 2005 9:11:54 GMT -5
Thanks Lawrence! That first kit has got an odd stroke. 3.835. All 39X LT1 stroker kits I know of have 3.875 in strokes. The dynoflow kit looks just like what I want. Much appreciated! |
|
|
|
Post by 94m6hardtopz on Sept 3, 2005 12:35:05 GMT -5
I looked on the Adperformance website but I could not find any 396 stroker kits. he has them, call him. his name is Brian. he will hook you up. |
|
|
|
Post by metalbeast on Sept 3, 2005 12:56:57 GMT -5
I looked on the Adperformance website but I could not find any 396 stroker kits. he has them, call him. his name is Brian. he will hook you up. I'll give him a call and see. Thanks for the info!! |
|
|
|
Post by jdawgs94z on Sept 4, 2005 1:23:50 GMT -5
|
|
|
|
Post by metalbeast on Sept 4, 2005 9:15:47 GMT -5
Looks like they have alot of stuff. Thanks guys for your replies. Keep em coming ;D |
|
,i think one carries lunati cranks in the kit,hope this helps 
