|
|
Post by novaLT1 on May 1, 2005 1:29:17 GMT -5
I have the factory LT1 Bowtie intake , and 750 holley 3310-1 with backfire kit ,this carb has the secondary metering block with jets and power valve , chrome fuel bowls and chrome dual feed fuel line , ran great , went to fuel injection , $ 200 plus shipping for both , also have K&N xtreme air cleaner lid (chrome ) with 14" x 3"
K&N filter and GM factory low profile base $ 80 ... or make me an offer on either or both items .... Email me at timkath1994@yahoo.com
|
|
|
|
Post by '68SuperchargedLT1Camaro on May 1, 2005 9:56:43 GMT -5
Hey novaLT1,
I'm guessing that you have the GM Performance Parts carburated dual plane intake that bolts onto LT1 heads. Is this the one you have?
Do you have any pics?
Raymond
|
|
|
|
Post by novaLT1 on May 1, 2005 22:37:09 GMT -5
Hi raymond , It just so happens that is the one ! The injection was not available at the time I had purchased the engine so I orderd this intake from a GM parts dealer . Ran it this way for a couple of years ,Thing ran great ,started good , just decided to take it up a notch and put the injection on it. I got the harness from Jim's performance , and am running the 7730 computer with the LT1 intake distributor mod where you can run a tuned port distributor, and of course does away with the opti. I apologize but my digital camera is DOA , will be getting one soon , Sorry! It is a good looking intake with the chevrolet bowtie up front of the intake........Tim
|
|
|
|
Post by '68SuperchargedLT1Camaro on May 2, 2005 0:14:59 GMT -5
Thanks for the info Tim. If I come across some extra cash, I might just pick it up from you if it hasn't sold before then.
Raymond
|
|
