|
|
Post by Dubb628 on Sept 17, 2005 3:23:25 GMT -5
I was wondering if I possibly had 300 rwhp with this setup. I have a 95' M6 T/A with K&N intake, u/d pulleys, pacesetter LT's and y-pipe with high flow cat and magnaflow cat-back, and a HPP.
I would like to sell the HPP and get a pcmforless tune, the HPP is pretty much just to correct my speedo for 4.10's.(couldnt really feel a difference in power). How much more horsepower could I get with the pcmforless tune?
|
|
|
|
Post by '68SuperchargedLT1Camaro on Sept 17, 2005 7:18:52 GMT -5
If I'm not mistaken, a bone stock LT1 F-body like yours makes somewhere around 255 RWHP. I can't say for sure, but 300RWHP sounds like a realistic estimate, assuming you currently have a good tune.
As far as the PCM for less tune is concerned, if your not at 300RWHP now, I think the tune would put you there.
|
|
|
|
Post by metalbeast on Sept 17, 2005 23:22:59 GMT -5
Stock M6 LT1s pull anywhere from 250-270 RWHP depending on the condition of the car. 300 RWHP is easily achievable with what you have.
|
|
|
|
Post by Macs95lt1 on Nov 1, 2005 5:24:47 GMT -5
Get the pcmforless tune. You won't regret it. All I can say is WHAT A DIFFERENCE. Bryan knows what he's doing.
|
|
|
|
Post by fast93z on Nov 1, 2005 14:15:14 GMT -5
You should already have that 300rwhp. Definately get a good tune.
|
|
|
|
Post by cammed95z28 on Feb 11, 2006 15:43:24 GMT -5
I put down like 310 with those mods... Get a dynotune and see  |
|
